Wednesday, November 30, 2016

How to make Money on YouTube in Easy Steps (Real Guidance) (Hindi) (1080...




YouTube Ads partnership is the real source for earning money from videos. But they will display advertisements on your YouTube videos, only after an approval from both sides.

YouTube Ads, Sponsor Advertising and Affiliate Advertising are the three ways that you can earn money from your YouTube Channel. Among those three, YouTube Ads is the major source for generating Income from your videos.

One hundred Hours of video are uploaded to YouTube every minute. This means that there is serious competition for getting video viral. You need to do everything you can to ensure that your videos get found. 

Youtube videos can become a good source of passive income provided your content is high quality.

Getting thousands views on every video is not going to be easy, it takes time, knowledge and resources. 

After you have signed up with YouTube and built good number of followers and views, you will receive an email asking if you want to monetise your videos. You will then be able to select your best videos to make money from.

Necessary Condition for Youtube Channel : 
  • 1) Two things are mandatory for this approval. First, you must verify your YouTube channel and secondly your YouTube channel must have a video with 5000 views.
  • 2) If you are qualified in both, you can apply now for YouTube Partnership. If approved, they will request you to connect your bank account with YouTube Ads programme for sending money on a monthly basis.
Types of YouTube Ads 
  • 1) Non Skippable in-stream YouTube Ads : Non-skippable ads are approximately 15 or 20 seconds in length and the ads are sold on a CPM (Cost Per Thousand), means YouTube can pay you $3-$7 for 1000 views.
  • 2) Display Ads : The ad that is appears on the top right side bar of the featured video page is called display ads. As like ‘InVideo’ you will get paid, if someone click on that link.
YouTube will take 40-43% of the revenue from advertisers and they will share the rest of the amount to the content creators.

You should upload your original creation, quality content should be advertiser-friendly.

How to make Youtube Channel : 

  • 1) Each YouTube account has one channel attached to it. YouTube account is the same as a Google account and creating YouTube account will grant you access to other Google products such as Gmail and Drive. Add keywords to help people find your channel. You can add keywords by navigating to “Advanced Section” of your Channel Settings. Make sure that your keywords are relevant to your content.
  • 2) Uploading Video : Try to upload content that is high quality with low noise and should not much lengthy. 
  • 3) Making High Quality Video : You will learn as you go. Improve your video by using a better camera or trying better editing software or techniques. You should try to improve the way things are filmed. Use a tripod or light your scenes for better contrast. 
  • 4) Increase Viewers : Building audience is key to increasing your income from Youtube. Always try to make the best content that you can and they will come to you. Share your video out on Twitter and Facebook. Share it with people. Subscribers are essential to becoming a partner. Start a blog, make a website or post them on other video or social media sites. The more views it gets, it is better. By sharing the link or embedding the video on the internet, you are increasing the chance of it getting noticed.
  • 5) Interaction with Viewers : Interact with your viewers by responding to comments and try to make special videos directly related to viewer comments and questions. 
  • 6) Monetize Videos : In order to start earning money on your videos, you will need to enable monetization. This means you are allowing YouTube to place ads in your video. 
  • 7) Setup Google AdSense : You can setup Google AdSense for free at the Google website. You must be 18 years older to create your own account. You need a bank account and valid mailing address as well as other information so AdSense can verify who you are and who to send the money to. 
How they Pay You : You may be able to receive a check, get a wire transfer or electronic transfer directly to your bank, or use Western Union. 

Check Video Analytics : Once you have some videos online, monetized, and being viewed, you can check out the analytics on them to see how they are performing. Click the Analytics option in your Channel menu.

Get your Channel ready to Earn :
  • 1) Enable your channel for monetization.
  • 2) Connect your YouTube channel to an AdSense account in order to earn money and get paid for your monetized videos.
  • 3) Take minutes to get to know the kinds of videos you can monetize and the different ad formats.
Tips for Making Video Popular on Youtube : 
  • 1) You will have to focus on creating videos that serve your audience's needs. As long as you are uploading regularly, you see your viewers increase.
  • 2) Always try to have clear sound in your video as it keeps people interested in your videos.
  • 3) Write detailed description about the video which contain your main keyword.
  • 4) Your videos quality matter a lot to increase your earning, so try to create High quality videos.
  • 5) Add annotations in your videos which help to increase video views and subscribers.
  • 6) Keep track of which videos perform the best and create videos with similar topic. As your video library grows, so will your income.
  • 7) Make your Title both attractive and relevant.
  • 8) Always try to be stand out from the crowd and try to be more creative and different video maker. 
  • 9) Continuous promotion of your video also helpful for increasing viewers.
Requirement for Making Small Studio for Videos : 

Recording in HD will produce a better quality video so be sure to use the high quality phone. If you want a more professional video, you can use a DSLR camera and external microphone

Basic Need for making Good Quality Video : A good-quality voice recorder and an HD camcorder which is essential need for basic videos.
  • 1) High Quality Camera : Quality is important and you have to record your videos in full HD (1080p).
  • 2) Video Editing Software : Windows have good video editing software (Movie Maker) but Adobe Premier is a decent option for advanced users.
  • 3) Sound Recording Equipment : Most cameras come with a microphone but if you are looking for best sound quality, you should purchase a good microphone.
  • 4) Lighting : It is better if you have good arrangement of lighting for your videos.
  • 5) Decent Backdrop : If you are filming a vlog or pieces to camera you must have to set up good backdrop. 
How Youtube Pay Money to Partners : 

The basics of this are companies who pay Google to advertise on your videos and you will get a cut of the profit.

Note :
  • 1) You need to associate an approved AdSense account with your YouTube account. You can create a new AdSense account or associate an existing one.
  • 2) If you want to monetize multiple YouTube channels, you do not need to have new AdSense account. You can monetize more than one YouTube channel with the same AdSense account.
  • 3) Even if your video is not good at first, keep at it. Practice makes perfect. Try to make each video better than the last.
  • 4) There is no universal model for what works and what does not work on YouTube. 
  • 5) To gain access to Youtube Partner programs, you need to have 15,000 cumulative watch hours for your channel over the last 90 days.
  • 6) YouTube does not pay out based on the number of views you get, you will make money when people watch ads on your channel. 
  • 7) On average, you will make little per view, just a fraction of a penny.
  • 8) Uploading and monetizing your videos is completely free. YouTube will take a cut of your ad earnings as compensation.
  • 9) You do not make money based on the amount of views you have. You make money based on people’s engagement with the ad. 
  • 10) Do not expand too far, you want dedicated viewers and they would not come if you do not make videos that are within their interests.
  • 11) Number of views is general indicator of revenue.
  • 12) The use of ad blockers has caused billions of dollars in lost revenue for Youtube creators as it skips showing ads on Youtube videos.
Promote Your Video : Share your video on social networks, Blogs, Forums, Message Boards and anywhere else you can online. You can embed your video on other sites or link to the video so viewers can watch it on YouTube. 

First of all, YouTube does not really pay for views or subscribers, instead it pays for the advertisements which appear on your videos. Also, not every time you play a video has an advertisement. It depends if any advertiser is bidding at that time.

Once you finish recording, you can edit your video with a desktop program like Windows Movie Maker or iMovie or a paid program like Adobe Premiere for better features.

Your AdSense earnings are determined by the number of views the video receives which advertisers show up on your video and how many times the ads are clicked. High engagement and clicks are more important than total views but the more views you receive, the higher likelihood of clicks.

Our Review : 
  • 1) This is a good option for filmmakers and video creators to generate income from their videos. At present, YouTube is having 1 billion users presence and 300 hours of videos, upload to YouTube on every hour.
  • 2) YouTube is not a good option for full-time money making but great place to share knowledge and earn some passive income. 
Consideration : 
  • 1) You can start earning money quickly if you have a strong subscriber base.
  • 2) Depending on what you are planning on filming you will need to get your setup sorted from the beginning.
  • 3) Youtube could help you earn more than you would from traditional blogging.
  • 4) As you edit your video, be sure do not use copyrighted music. 
  • 5) YouTube Advertising is managed in the Adwords platform. Advertisers choose ads on a Cost per Click (CPC) or Cost per View (CPV) model.
  • 6) If your video gets ten million views but nobody watches or click the ads, you will not make any money. 
  • 7) Partnerships with YouTube for most people do not earn very much. Unless you have a large success, you should take Youtube as part time income source, not primary source.
  • 8) If you are not fully into this YouTube, then it is hardly worth the effort i.e. more input less output. 
  • 9) In starting, you have to put a lot of resources like time for research, money for equipment etc but you would not get anything in return for couple of months. 
  • 10) Background noise in videos can irritate some of your viewers so you should keep that low.
  • 11) Make sure to use a soundproof environment and try to minimize echo if and when you can.
  • 12) There are more than 20,000 partners worldwide with Youtube and its number increasing daily. 
To make money from YouTube, as affiliate marketer, you can review your affiliate products on video or create “how to use this product” tutorials. Do not forget to link to your products in your YouTube descriptions otherwise you would not get credit for sales.

YouTube pays you through Google AdSense.

Always Consideration : 
  • 1) Just to be clear, you can not monetise any videos with copyrighted material in them. 
  • 2) Remember that some people may leave mean comments to bring you down. Do not let them discourage you.
  • 3) If you get famous on Youtube, you can approach companies to talk about advertising or at the very least free sample for you to review/talk about.
Our Advice : Always make sure to follow the rules of Youtube, no inappropriate content, copyright or spamming.

Tuesday, November 22, 2016

Reliance Jio 4G WiFi Router (JioFi2): Unboxing and Real Speed Test with ...



Unboxing and real speed test of Reliance Jio 4G WiFi Router (JioFi2) with BSNL Broadband in small town in daytime. (Testing Traffic Load in Day with BSNL Wired Broadband) (Voice : Hindi)

Reliance JioFi Mifi Hostpot router is great device to get connected and use one internet in several devices. You can connect upto 31 different devices on through this router. Also you will be getting 3 months preview offer including unlimited 4g internet access with really outstanding speed.

Connection Settings for Reliance JioFi 2

Connecting to JioFi 2 Wi-Fi hotspot is simple. The SSID (or Wi-Fi network name) and password is mentioned underneath the battery, where the SIM and microSD card slots are. However, if you want a customized Wi-Fi name and password of your choice, first connect to the Wi-Fi network and on your web browser, type and go to jiofi.local.html.

Both, the default user ID and password is ‘administrator’ for accessing the configuration settings. It will open the interface as above, letting you change password, block users from accessing the network and more.

Reliance JioFI comes with a free Jio 4G SIM. But you will need to go through the full documentation to get through the process of getting the SIM without which this is just another Wi-Fi hub. The device has a 2300mAh battery. In the box, you have a charger and USB cable.

Specifications of Reliance JIOFi2

  • Number of wifi connections allowed : 31 (Wi-Fi) + 1 (USB Tethering)
  • USB Connectivity : 1 PC or Laptop
  • Batter Capacity : 2300 mAh
  • Wavelength : LTE (2300/1800/850MHz)
  • WAN : IEEE 802.11b/g/n 2.4G only
  • Power Supply : AC: 100-240V; DC: 5V and 1A
  • Dimensions : 85.0 x 55.0 x 16.0mm
  • Charging Port : Standard Micro USB port that appear in all smart phones.
  • Battery Full Charging Time : 1.5 to 2 Hours
  • Ports in Jio Router : USB port to connect to PC
  • mini Sim Card slot for inserting JIo 4G preview Sim Card.
  • Micro SD card slot to use as a card reader.

How to activate Free JIO 4G Sim?

After application submission call 18008901977 from registered mobile, number to activate device. Install JioJoin application in your mobile and call 1977 to activate mobile services such as Voice calls, Video calls, SMS, MMS etc.

How to make Voice Call on Reliance JioFi2

How can we use voice calling in this Reliance MiFi device? Whenever you connect your mobile via wifi and download app called JioJoin (only android for now) from play store it would automatically detect your Sim Card No in MiFi device and you can make calls on that app on your android mobile or tablet connected to MiFi WiFi network. So that app would be phone dialer for sim card No in MiFi device. All calls made via app would show Caller ID as that on MiFi Sim Card while all incoming calls to that MiFi Sim Card would ring the app on phone.

How to connect Reliance Jio network to Desktop Computer

Most laptop have WiFi inbuilt to connect to Jio WiFi but not desktop. To connect to desktop, your phone need something like USB WiFi Adapter if it is already not wifi enabled.

Our Review :

  • 1) In small cities and sub-urban, Reliance Jio disappointed lot as it hardly touched 3 Mbps speeds that only sometimes in mid night when very few subscribers were on their network.
  • 2) We found that Jio speed at daytime goes upto 2 Mbps and upto 3 Mbps at night after 11 Pm.
  • 3) We believe there is lot of scope for improvement and Reliance Jio needs to do its home work well before launching it commercially.
  • 4) If you leave the hotspot in one side of the house, you would not pick up the signal at the opposite side.

Note :

  • 1) The speed of JioFi depends solely on your location. So if you live close to a Jio Tower, you will be getting good speeds.
  • 2) You just need to charge the router and then you can use even without electricity.
  • 3) It can connect to desktop Computer via USB cable and acts as a router.

Consideration :

  • 1) It cannot be compared to other normal WiFi routers as it is a portable device with a built in antenna. There is no way to extend the WiFI range other than using after market WiFI extenders.
  • 2) Reliance Jio 4G is under Beta Release as of now and hence the speed fluctuates from location to location.
  • 3) Due to non-commercial release, Reliance Jio does not have the proper channel quota for placing the calls to other operators. Due to this reason the call-drops are very often.

Lot of people in small town are getting only 2.5 mbps downloading speed on Reliance Jio 4G networks slower than BSNL broadband before commercial launch.

Reliance Jiofi2 is best wifi internet option still even under welcome offer. As no provider gives 120GB per month free for 3 months in Rs 1999 which includes Jiofi 2 device. One can later unlock these jiofi mifi devices to use it as 4G modem whenever solution comes out.

Sunday, April 17, 2016

Intel HDMI Compute Stick: Feature and Quick Review (Hindi) (1080p HD)



The Intel Compute Stick with Windows 8.1 is powered by a quad-core Intel Atom processor with integrated Intel HD Graphics, coupled with 2GB of DDR3 RAM. It has 32GB of inbuilt storage and support microSD card slot for storage expansion. The processor of this stick has Intel Virtualization Technology (Intel VT-x).

The Intel Compute Stick has a USB 2.0 port, Wi-Fi 802.11 b/g/n and Bluetooth 4.0 and connects to TVs or monitors via its HDMI 1.4a port.

This stick has full fledged USB peripheral support. You can connect a USB hub and can connect USB hard drive of one TB or even more various Peripherals like external DVD writers and even USB soundcard and keyboard mouse it can handle it.

Features of Intel Smart HDMI Stick
  • Quad-core Intel Atom Z3735F processor
  • 32GB onboard storage
  • 2GB DDR3 onboard memory
  • Windows 8.1 operating system
  • Intel HD graphics
  • Intel HD audio
  • Bluetooth 4.0
  • WiFi 802.11bgn
Specifications of Intel Compute Stick with Windows 8.1 Bing
  • Processor Speed : 1.33 GHz (Supports Intel Virtualization Technology (Intel VT-x)
  • Graphics : Intel HD Graphics 
  • Operating System : Windows 8
  • RAM : 2 GB DDR3
  • Storage Capabilities : Windows: SDXC v3.0 Slot with UHS I-Support
  • Processor Cache : 2 MB
  • Memory Card Supported : Micro SD
  • Processor Type : Intel Atom Processor Z3735F
  • Internal Storage Capacity : 32 GB
  • Storage Type : eMMC
  • Dimensions : 103 x 37 x 12 mm
Connectivity Features
  • Wireless Network Connectivity : Integrated 802.11 b/g/n
  • Bluetooth : v4.0
  • HDMI Port : HDMI 1.4a
  • USB Port : Available
  • USB Type : 1 USB 2.0
  • Audio : Intel HD Audio via HDMI, Supporting Multi-channel Digital Audio
  • Peripheral Connectivity : Security Notch, Power Port
Power Features
  • Power Source : Chorded
  • Power Requirements : 5 V, 2 A Wall-mount 
Benefits :
  • 1) Any HDMI display can be converted to a Quad Core Intel Atom processor-based computer using this Intel Compute Stick.
  • 2) This device is easy to use. Take it out of the box. Plug it into your HDMI TV or monitor. Transform it into a full computer.
  • 3) This is really portable PC. It fits in your bag/pocket and you can connect it to projector too easily by using HDMI socket and give your presentation using this stick easily.
  • 4) Inbuilt fan keeps cool Intel atom processor of this stick.
Review :
  • 1) This product can plug into a TV and turn it into a hub for apps, streaming media and entertainment. This device can work out as a low-cost PC in any other situation. 
  • 2) Overall the system is perfect for basic browsing, office productivity and some Entry level gaming for kids.
  • 3) It is not well suited for playing heavy duty gaming like asphalt or touch based games.
  • 4) It just turns your lame old LCD TV screen into a full fledged PC.
  • 5) Windows 8.1 integration is good and you can download Apps for Windows store as well. 
Consideration :
  • 1) You have to keep a backup power supply device to prevent data loss and interruption free work/browsing experience on this stick.
  • 2) The device will not work without a HD TV and it always need a wireless keyboard and mouse to work.
  • 3) It is better to be connected to good power source as it will not power by USB properly from TV socket.
  • 4) Don't expect laptop/desktop-like speed or multitasking from this stick. 
Note :
  • 1) The device will not work without a HD TV. 
  • 2) The only way to get audio out is through the HDMI 1.4a port or using a USB audio device. 
  • 3) No microphone and no jack for it either, But you can use microphone by using USB Sound Card.
  • 4) People who usually watch movies and do some browsing in Internet and works on MS Office then for them it is the cheapest solution.
  • 5) You should buy at-least 32 GB dedicated class-10, 80 Mbps SD card along with it.
  • 6) This stick comes preloaded with Windows 8.1 with Bing (the free version of Windows). 
People can change the operating system of this stick too. But you have plug in bootable USB driver on this PC and install the required OS on your stock computer. But you will loose benefits of original Window 8.1 Bingo like Microsoft protection and latest window updates.

Don't expect it to play high end games and not to do heavy multitasking. It is okay for basic browsing, playing movies and Office stuff.

As this Compute Stick is portable, you can carry it with you from home to work and use it in both places, provided that you have a screen and input device (keyboard, mouse) in each location.

Friday, January 29, 2016

Difference between Cable and DSL Internet



Question : What is the difference between Cable and DSL Internet?

DSL sends data faster than it receives data and is not easily accessible in rural areas. Both cable and DSL offer packages that vary in price depending on connection speeds. Basic DSL plans feature speeds that start at 1 kilobyte per second and increase up to 3 megabits per second. Cable plans generally start with speeds of 1.5 megabits per second and increase up to 5.0 megabits per second.

Another major difference between cable and DSL is price. As cable Internet service is faster than DSL and as a result is three to four times more expensive. Cable Internet is generally bundled with telephone and cable TV service.

One advantage of DSL plans is that it allows users to access a steady Internet connection. Unlike cable, the DSL connection speed remains the same regardless of the number of users accessing the service. Bandwidth availability is affected while using cable Internet service when there are a large number of users accessing the Internet. This results in slow service and transfer speeds.

What is difference between DSL and ADSL?


Question Asked : What is difference between DSL and ADSL? What type of connection is commonly used in India? (Question asked on my Youtube Page

Asymmetric digital subscriber line (ADSL) is a type of digital subscriber line (DSL) technology, a data communications technology that enables faster data transmission over copper telephone lines than a conventional voiceband modem can provide. ADSL differs from symmetric digital subscriber line (SDSL).

ADSL works by utilizing frequencies that are not used by a voice telephone call. A splitter or DSL filter allows a single telephone connection to be used for both ADSL service and voice calls at the same time. ADSL can generally only be distributed over short distances from the telephone exchange typically less than 4 kilometres, but has been known to exceed 8 kilometres if the originally laid wire gauge allows for further distribution.

At the telephone exchange the line generally terminates at a digital subscriber line access multiplexer (DSLAM) where another frequency splitter separates the voice band signal for conventional phone network. Data carried by the ADSL are typically routed over telephone company's data network and eventually reach a conventional Internet Protocol network.

Thus the upload signal is weakest at the noisiest part of the local loop, while the download signal is strongest at the noisiest part of the local loop.

ADSL is a type of DSL where the upstream and downstream speeds differ (hence the "asymmetric" part). There are many variations of DSL technology for different types of application (HDSL, SDSL, etc). 

ADSL

ADSL is a broadband connection technology which utilizes existing copper wired telephone networks. ADSL uses a wide range of frequencies over an existing telephone line to deliver much higher speeds than standard 56k modem (between 10 and 140 times faster). It is also possible to use your phone while online. 

DSL

DSL stands for Digital Subscriber Line. Generally if you have a DSL connection, you are getting it right from the phone company. DSL is more like the older 'modems' in that they do use the standard copper phone lines that are in your house. DSL requires that there be a special switch installed at your local phone company's main routing station. DSL also has a limitation of a 4 mile radius. One of the cool features of DSL is that you do not need to have a 'special' line installed - you can be surfing the internet and talking to someone on the phone all on the same line. This is because DSL uses a high frequency that does not affect the normal use of your phone. 

There are two commonly type of DSL, DSL (also known as SDSL) and ADSL. DSL or SDSL is the more expensive, but offers the most bandwidth. The S in SDSL stands for Symmetric or synchronous, which means that the bandwidth of both upstream (sending data) and downstream (receiving data) are the same speed. The actual speed you get depending upon the package you sign up for, and how far away from the switch you are. The most common speeds are 256k (256kilobits)/second and 1Mb (1megabit)/second. ADSL (Asynchronous Digital Subscriber Line) is the same as SDSL, but the upstream bandwidth is smaller than the downstream. This version of DSL is generally more affordable than SDSL. Common ADSL speeds are 256kb downstream - 96kb upstream, 1mb downstream - 256kb upstream.

DSL was developed and patented in 1988 by Bell Communications Research, Inc. The main advantages of DSL at the time were the speed it offered and the fact that, for the first time, it allowed people to use Internet and phone service at the same time. The main disadvantage was that the digital signal's strength decreased as distance from the provider's central office increased.

Although it uses the same wiring as previous technologies, DSL sends information digitally. This greatly increases the amount of information that can be sent at once. ADSL is the most common type of DSL connection. 

Note :
  • The opposite of ADSL is SDSL, which stands for symmetrical digital subscriber line. 
  • SDSL provides a high-speed data connection that gives equal priority to upload and download speed. 
  • Other types of DSL include Internet protocol subscriber line, rate-adaptive digital subscriber line, Uni-DSL and Etherloop.
People can ask us directly about your computer on our Facebook Page. Search us by name “Sukhdev Taneja” on Facebook, Googleplus or Twitter. You can watch our videos on youtube (Sukhdev Taneja) about computer tips in Hindi language.


Sunday, January 3, 2016

How to change Hard Drive in Lenovo G570 Laptop (Hindi) (1080p HD)



Now it is better option to improve your laptop by replacing the hard drive with a SSD or hybrid hard drive which is faster, quieter and save more energy, while recovering your system and your data. By putting Operating system on an SSD, the startup and shutdown will be faster, as well as the reaction of your system will be increased. 

Specifications of Lenovo G570 Laptop are as follows :
  • Processor : Intel Core i3-2310M or Intel Core i5-2410M processors
  • Display : 15.6 inch
  • Graphics : Intel HD Graphics 3000
  • RAM : 4GB DDR3
  • Storage : 500GB hard disk drive
  • Battery : 6-cell
Lenovo G570 can be equipped with a Blu-ray drive instead of a DVD reader/writer.

Transfer your system files or Data on new SSD or hybrid hard disk

Use cloning software that comes with the SSD to copy of your original hard drive onto the SSD. You can copy your software, settings and documents to new SSD. Steps as follow : 
  • Step 1) Turn off your computer and connect the transfer cable to the SSD.
  • Step 2) Plug the other end of the cable into a USB port of your computer. Start your computer and insert the disk with cloning software included with your SSD.
  • Step 3) Boot from the CD. To do this, right from the start, press the F1, F2, F12 or Del depending on your computer. A message is typically displayed on the screen. In the menu that appears, select your CD with the arrow keys and press Enter. The computer boots from the CD. Click on Accept.
  • Step 4) Click the Let’s Get Started. Initially select the source disk, that is to say, the internal hard drive to your laptop and click Next.
  • Step 5) Then select the destination disk, that is to say the SSD and click Next.
Now that you have copied your entire system and your files on the SSD, you are ready to replace your hard drive with SSD in your laptop. 

How to install Hard Drive in Lenovo G570 :

On the bottom of your Lenovo G570 laptop, find the hard drive door to access the hard drive.
  • Step 1) Loosen four screws securing the cover on the bottom. Lift up and remove the cover.
  • Step 2) Remove two screws securing hard drive caddy to the laptop chassis. Slide the hard drive assembly in the direction opposite to the SATA connector and then carefully lift it up in order to remove it from drive bay.
  • Step 3) To separate the hard drive from the caddy you will need to remove four screws that fix these two parts together.
  • Step 4) There could be an Aluminium adhesive tape between both parts making their disassembly more difficult so be careful. You will have to transfer the mounting bracket and Aluminium hard drive shield to the new SSD.
After replacing the HDD you will have to reinstall the operating system and transfer important data from older Hard Drive to new one.

There is second way to install other hard drive in Laptop :

You can use HDD Caddy to replace the DVD-Drive from the Lenovo G570 series for a second hard drive (or SSD). Add a second hard drive to your laptop using your laptop's optical drive. This device can fit in a "standard" optical drive bay found in laptop computers. Simply pull out your DVD drive and replace it with our optical bay hard drive caddy. 

You have to remove DVD Drive and plug the adapter (plus hard drive) in slot.

How to install RAM memory in Lenovo G570 :

Both memory modules can be accessed on the bottom of the laptop.

To remove any currently installed memory module just spread the latches in the direction opposite to the memory slot. The memory module will pop up at about 45 degree angle and can be safely removed from the slot. (As shown in Video)

Lenovo G570 can take up to 8GB RAM. You can install up to 4GB RAM module into each slot.

Lenovo G570 use RAM of PC3-10600 DDR3 SDRAM SODIMM 204 pin.

Note : Lenovo G570 has to run a 64-bit OS to be able to use all 8GB RAM.

Note : Before you begin any procedures, turn off the laptop, unplug the power adapter and remove the battery. Laptop parts are very sensitive to static electricity so ground yourself before touching anything inside you laptop by using grounding strap or touch a metal pipe.

You can use SATA2 or SATA 3 SSD, as both will work at the same rate, as your interface is SATA2, but the advantage of the SATA3 is that you can use this drive in the future in another laptop that does have the SATA3 interface, thus it will give greater speed in that laptop. SATA2 interface has speed of 3Gbps while SATA 3 uses 6Gbps.

Wednesday, December 2, 2015

How can I increase or decrease size of photos after scanning


Question : How can I increase or decrease size of photos after scanning (Size in Data like kilobyte or megabytes)?

Solution :
That is so simple. Mostly scanner scan photo in raw format like .bmp extension which have high size in megabytes. 

If you want to send your photos through Internet to other one, it will consume lot of your Internet Data and also it take more time. So, you must reduce size of your photos by converting it in other format like ‘JPG’ format. 

JPG format can save photos in low size data and it do not affect quality of photo at all. For converting your photos into JPG format, you need simple photo editing software which is available in Windows Xp or 7. This software is called Microsoft Paint

You have to open that photos in Microsoft Paint and try to save it in JPG format by option "Save As" in File Menu. You must choose extension or format of photo in "JPG" format at time of saving it. 

You can find Microsoft Paint in Window by this path "Start>> Accessories>>Paint". Or you can just type "mspaint" in "Run" menu of Start.

Or you can choose other photo editing software like Adobe Photoshop for decreasing size (in Kilobytes) of Photos. You can reduce size of photo in Online Photo Editing Website too.

Note : People can ask us directly about your computer on our Facebook Page. Search us by name Sukhdev Taneja” on Facebook, Googleplus or Twitter. You can watch our videos on youtube (Sukhdev Taneja) about computer tips in Hindi language.

Monday, November 30, 2015

Why my computer is not booting up?


Question : Computer is well connected and has power supply. But still computer is not booting up? Why?

Solution :
There are many reasons for not booting of your computer. It can be due to following common reasons.

1) RAM : RAM is not properly installed on your computer’s motherboard. And it make beep sound twice from motherboard’s speaker.

2) Processor : The processor is not properly installed on motherboard.

3) Harddisk Connection : The hard disk with operating system is not properly connected to motherboard, or hard disk does not get enough power from power source of computer i.e. SMPS. (This is most reason when your computer do not boot on starting.)

4) 
Operating System : The operating system of computer (example Microsoft Window or Mac etc) is corrupted or need to reinstall or repair by operating system’s DVD. 

5) BIOS Setting : Lastly, your booting option is selected incorrect in BIOS of your motherboard of computer. That means, in BIOS, computer is having option to boot from other source of booting rather than of hard disk, example like DVD ROM or floppy or USP device etc.

Our Experience : The main reason of computer is not booting due to RAM error or Hard disk connection. 

If your computer is showing BIOS menu on your LED screen, that mean, it’s processor or RAM is well connected on motherboard.

If it show Boot Error on your LED’s screen, it means, it is not connected your Hard disk or not allowed to access your hard disk in motherboard’s BIOS.

Only computer expert can guess actual reason for error in your computer for not booting up.

Note : People can ask us directly about your computer on our Facebook Page. Search us by name Sukhdev Tanejaon Facebook, Googleplus or Twitter. You can watch our videos on youtube (Sukhdev Taneja) about computer tips in Hindi language.

Can I install windows 8 or 10 in old model computer



Question : Can I install windows 8 or windows 10 in my old model computer or laptop?

Solution : May be but it depend on your computer or laptop configuration. If you have purchased latest computer with high speed processor having high capacity hard disk and RAM (3 Gb DDR2) at that time, then you can install window 8 or window 10. If you have dual core processor with high RAM (3 Gb DDR2) and hard disk space (20 Gb), then you can install Window 8 or 10. 

But they can be little slow as latest processor are now having more cache or core. And now speed of RAM also improved (Like 1600Mz for DDR3 as compare to 800Mz for DDR2 in older computer).

But you can improve your operation speed by upgrading your processor with latest motherboard or RAM.

Note : You can issues to arrange driver of old motherboard for windows 8 or 10 as they are not easily available after few years for new operating systems.


Thursday, October 15, 2015

Check out the Intel Compute Stick in action!



Intel has created a basic desktop computer that’s small enough to fit inside your pocket. The Intel Compute Stick plugs into any monitor or television with an HDMI connection, so you can take your pictures, documents and presentations anywhere.

The Compute Stick uses a quad-core 1.33GHz (1.83GHz Turbo) Intel Atom Z3735F based on the Bay Trail architecture, the same kind of chip you would find in some cheap x86-based Windows and Android tablets/

The Compute Stick is designed for light use, such as word processing, browsing the internet and watching TV.

Configuration : The Windows 8.1 version is powered by the quad-core Intel Atom Z3735F processor, clocked at 1.33GHz, paired with 2GB of RAM. 

Review of Intel Compute Stick : Intel Compute Stick feels like it is in its experimental phase.

Features of Intel STCK1A32WFC Compute Stick PC
  • Processor : Quad-core Intel Atom Z3735F 
  • Onboard Memory : 2GB DDR3 
  • Onboard Storage : 32GB 
  • Operating System : Windows 8.1 
  • WiFi : 802.11bgn
  • Bluetooth : 4.0
  • Graphics : Intel HD 
  • Audio : Intel HD

Intel Compute Stick review



Features of Intel STCK1A32WFC Compute Stick PC
  • Processor : Quad-core Intel Atom Z3735F 
  • Onboard Memory : 2GB DDR3 
  • Onboard Storage : 32GB 
  • Operating System : Windows 8.1 
  • WiFi : 802.11bgn
  • Bluetooth : 4.0
  • Graphics : Intel HD 
  • Audio : Intel HD

Tuesday, May 5, 2015

Unboxing of TP-Link 150Mbps High Gain Wireless USB Adapter (Hindi) (1080...



Watch of Unboxing (unpacking) of TP-Link 150Mbps High Gain Wireless USB Adapter (Model : TL-WN722N). (Voice : Hindi)

Features of Tp-Link 150Mbps High Gain Wireless USB Adapter (Model : TL-WN722N)
  • Wireless Speed Upto 150 Mbps
  • Dimensions : 3.7 X 1.0 X 0.4 inches
  • Frequency : 2.4 - 2.4835 GHz
  • Wireless Security : 64/128-bit WEP / WPA-PSK / WPA2-PSK
  • Connectivity : USB 2.0
  • Detachable Antenna
  • Easy to Install
  • USB extender for better angles. 
TP Link high gain wireless USB adapter is easy to use and install. The wireless USB adapter can provide N speed of up to 150Mbps for fast data transfer. This wireless USB adapter is capable of supporting 64/128 WEP, WPA /WPA2/WPA-PSK/WPA2-PSK (TKIP/AES) and IEEE 802.1X.

This wireless USB adapter is compatible with all 802.11n/b/g products.

TP Link wireless USB adapter has 4dBi high gain external antenna that can be rotated and adjusted in different directions to fit various operation environments, and can bring better performance than the internal antenna. 

For more demanding applications, the antenna can be replaced with different antennas to get more flexibility and wider wireless coverage.

Specifications of Tp-Link 150Mbps High Gain Wireless USB Adapter
  • Antennae : 4 dBi Detachable Omni Directional (RP-SMA)
  • USB Connector : USB 2.0
  • Frequency : 2.4 - 2.4835 GHz
  • Maximum Wireless Transmission Rate : 150 Mbps
  • Encryption : 64/128-bit WEP, WPA-PSK/WPA2-PSK
  • Work Mode : Ad-Hoc, Infrastructure
  • Receiver Sensitivity : 130M: -68 dBm, 108M: -68 dBm, 54M: -68 dBm, 11M: -85 dBm, 6M: -88 dBm, 1M: -90 dBm
  • Leds : Off, Flashing Slowly, Flashing Quickly
  • Supported Protocols : IEEE 802.11b/g/n, IEEE 802.1X
  • Modulation Technology : DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM
  • Operating System : XP, Vista, Windows 2000, 7
Dimensions
  • Height : 11 mm
  • Width : 93.5 mm
  • Depth : 26 mm
Operating Conditions
  • Operating Humidity : 10 % - 90 % Non-condensing
  • Operating Temperature : 0 DegC - 40 DegC
Benefits of Tp-Link 150Mbps high Gain Wireless USB Adapter
  • Tp-Link wireless USB adapter give Wireless N speed up to 150Mbps makes it suitable for video streaming, online gaming and VoIP.
  • Tp-Link adapter has 4dBi directional antenna which is efficient in receiving signals transmitted far.
  • Tp-Link wireless USB adapter has high gain external antenna that is detachable from this USB adapter. Detachable antennas allow for better alignment and stronger antenna upgrades.
  • This adapter is compatible with all 802.11n/b/g products.
  • It supports 64/128 WEP, WPA /WPA2/WPA-PSK/WPA2 PSK (TKIP/AES) and IEEE 802.1X for secure connectivity. 
  • Tp-Link wireless USB adapter supports Sony PSP X-Link for online gaming for Windows XP.
Our Review : 
  • Tp-Link wireless USB adapter has good performance with 15 meters range. It gives at least 60-70% signal and good speed. It works well even in high walls restriction and blocks.
  • Tp-Link wireless adapter has external antenna with RP-SMA connector so that we can change this antenna with more powerful antenna.
  • Tp-Link wireless adapter has USB extender which can be used to change different directions for better signal strengths. This adapter can be set up as WiFi hotspot easily.
  • This USB adapter has 4dBi external antenna connected which can be adjust and align to achieve better reception.

Consideration
  • Tp-Link wireless USB adapter is little big and feel uncomfortable for small laptops or notebooks (around 12 inches)
  • It is stated that it gives you a speed of 150 mbps, in real life conditions the speeds reach a max of 66.3 mbps.

Seagate 2TB Backup Plus Slim: Unboxing and Review (Hindi) (1080p HD)



Benefits of Portable Drive is that they are immune to network viruses and you can protect your digital data in the physical storage device in a secure location which helps against any disaster like fire or earthquake related threats. 

Seagate Backup Plus Slim is a 2.5" SATA-600 interface hard drive in a black plastic enclosure which connects via USB 3.0 cable to any PC or Mac computer.

Seagate Backup Plus Slim weighs 150 grams and is just 12mm thick - about the size of a smart phone. Power for the drive is supplied via the USB 2.0 or USB 3.0 port.

This drive is thinnest portable 2TB hard drive in the market and it can be fitting easily into most pockets.

Inside of this drive, there is a 5400RPM, 3-platter hard disk with 32MB of cache. 

The body of Seagate Backup Plus Slim consists of a plastic build with a bright black top cover; the company logo is located on the bottom corner.

The Dashboard software is included with Seagate Backup plus Slim and is conveniently located on the drive itself. To install the Dashboard software, users can simply double-click the file

Seagate Dashboard has several tools to facilitate easy backups from a computer, either by specifying types of files, locations or configuring a set schedule. Another unique feature is the ability to share new videos to a YouTube account. 

Seagate Mobile Backup app for the iOS and Android mobile devices is available free for download, allowing users to back up all of their data to the drive while on the same network as well as to the cloud when on the go.

Seagate steps up to the plate with "a download a complete archive of all your data" button for Facebook and Flickr but Seagate Dashboard limits itself to images and videos for social media backup.

Specifications of Seagate 2TB Backup Plus Slim External Hard Disk
  • Software : Seagate Dashboard, NTFS Driver for Mac
  • Capacity : 2 TB
  • Size : 2.5 inch
  • Dimensions : 12.1 x 76 x 113.5 mm
  • Weight : 159 g
  • Connectivity : USB 3.0
  • OS Supported : Windows: XP SP3, Vista, 7, 8, Mac OS X 10.6, Android 2.3, iOS 6
  • Form Factor : Portable
  • Features : Backward Compatible with USB 2.0, Seagate Mobile Backup App on an iOS or Android Mobile Device to Backup all of the Pictures and Videos from the Device to the Drive or the Cloud
The read and write sequential speeds of Seagate Backup Plus Slim via USB 3.0 is reported 88.6MB/s and 119.3MB/s respectively.

Benefits of Seagate Backup Plus Slim
  • Backup Plus Slim is fully USB powered, giving users the ability to bring all of their digital content without carry an additional external power supply.
  • Seagate Backup Plus Slim is an impressive portable hard drive for its physical size and capacity. 
Our Review

The Hard disk is very compact and light weight which makes it fits in ones pocket very easily. The data transfer speed via USB 2.0 is reported around 20-25 MbPs. (Shown in Video too)

The total thickness is not more of 12 mm. It is smaller then a Smart phone (4.5 inch Smartphone). This portable drive is light and slim as a Smart phone. 

The Backup Plus Slim does not require any external power adaptors, all power is supplied via the USB port. 

This drive is responsive and it does not have vibration or heat problem.

Consideration
  • Always try to handle Backup Plus Slim with care as Plastic case is not very thick because this drive over all is very slim.
  • The USB 3.0 cable could have been a bit longer. It should be 0.75 or 1 metre. This drive has 0.5m USB Cable which is suitable for laptops but not for desktop computer or Smart TVs. 
  • This drive has actual usable space is 1.81 TB. (Shown in Video too)

Thursday, July 31, 2014

Easy Steps to configure Tp-Link ADSL2 Modem for BSNL Broadband (Hindi) (...



To run ADSL Broadband from BSNL Network, we have to use VCI value to 35 in Tp-Link 300Mbps Wireless N ADSL2+Modem’s setting. There are easy step to configure ADSL modem for BSNL Broadband via Bridge Mode (Encapsulation) :

Step 1) Open the web browser and type the IP Address of Tp-Link ADSL2 Modem in the address bar (default is 192.168.1.1) then press Enter .

Step 2) Type the username and password in the login page, default username and password are both admin in lower case, then click OK to log into the Tp-Link ADSL2 Modem.

Tp-Link ADSL2 Modem works smoothly with BSNL network (Bridge Encapsulation) without more changing. We have to put IP Address of BSNL Network in our Ethernet's port setting.

  • IP Address : 192.168.1.2 to 192.168.1.24
  • Subnet Mask : 255.255.255.0
  • Default Gateway : 192.168.1.1
You can check connectivity of ADSL modem with BSNL Broadband :

Ping 192.168.1.1-t (Type in Command Box of Window Xp/Window 7)

You don't need to run the setup program but it would probably make the task easier. 

The telephone cable has to be plugged into the router (wireless). Then Just plugin Ethernet cable into any of the four slots of the router and connect to computer/Laptop and then follow the instructions on the screen. You can choose secured or unsecured connections. Since you has default setting in your ADSL2 Modem. You have to select the modem password and also password given by the BSNL. It is not much difficult, but you can to try as trial and error method. In case you went wrong, just press reset button provided in the router with pin and try from the beginning.

If you want to run internet via PPPoE/PPPoA mode of BSNL Broadband (They do not need any username or password to start Internet and it can run on Internet on Android/Smartphone/Tablets via WiFi too). There are few steps to configure Tp-Link ADSL2 Modem. 

1) PPPoE/PPPoA Mode : Select the connection type to connect to the BSNL Boradband by PPPoE/PPPoA mode and then click the NEXT button.

2) VPI and VCI Value : Change the VPI/VCI settings as per BSNL Broadband. This setting is very much important for internet connectivity. 

Use the following VPI/VCI settings for BSNL Broadband – 0 and 35

In Tp-Link ADSL2 Modem, we have to chose virtual Circuit as PVC2 through (Interface Setup > Internet) as shown in video.

3) BSNL Username/ Password : Enter the user id and password supplied by BSNL Broadband. The field is case sensitive.

Now go to Wireless Menu of Interface Setup of your TpLink ADSL2 Modem.

4) Access Point : If you has ADSL Router with wireless function and you want to connect to it wirelessly then set Access Point as Activated. (As shown in video)

5) SSID Name : Select the Basic Setting submenu of Wireless Menu in the configuration page. In Wireless Basic settings you can enter the SSID (Name of your wireless network). You can use anything as SSID. Maximum character limit is 32.

6) Security Encryption : You must configure the Wireless Security options to make your WiFi network private. Tp-Link ADSL2 router supports three type of WiFi security modes. WEP, WPA-PSK, WPA2 –PSK. By default Wireless security is disabled. You have to select the proper mode of WiFi security as per your requirement. It is advisable to use WPA-PSK or WPA2-PSK. (As shown in video)

7) Pre-Shared Key : Pre-Shared Key is the password used for authentication. Use a non guessable number or group of words as password. You can enter 8 to 63 alphabets or number as password. You have to enter the same password in your wireless devices like computer, Laptop, Mobile etc for connectivity. Click the Save button for saving the settings.

8) Wireless MAC Address Filter : Wireless access can be filtered by using the MAC addresses of the wireless devices. So, it is advisable to keep MAC Address Filter as Deactived for easily access internet on any wireless devices. (As shown in video)

Note : All other setting of Tp-Link ADSL2 Modem can be used as default for BSNL Broadband. So, do not need to change that value if you do not know properly about it.

Select the connection type to “Connect Automatically”. This will make connection automatically after switching ON the Tp-Link ADSL2 Modem. Click the save button after completing above mentioned steps. Reboot the modem by clicking the Reboot sub menu under System Tools Menu.

You can reboot ADSL2 Modem by OFF/ON the power supply too.

Saturday, June 28, 2014

D-Link DIR 505 Portable WiFi router review



D-Link DIR-505 can also act as a repeater to increase the wifi range of existing wifi network and also had WiFi hotspot mode this router also has app for iOS and android phones.

Tuesday, May 13, 2014

Extend your WiFi range with WiFi repeater setup



A guide on how to easily setup a Wireless repeater (TL-LINK TL-WA701ND) to extend your WiFi range and coverage

Thursday, February 6, 2014

Easy Steps for Installing DDR2 RAM (Hindi) (1020p HD)



RAM is sensitive to static charges and should be handled carefully. Never touch the metal conductors and only handle RAM by their edges. 

Depending on its architecture, there will always be at least one notch in a RAM, but never more than two.

RAM modules are keyed with little notches that fit over corresponding tabs in the RAM slots. Before inserting the RAM module, make sure that the notches and tabs are correctly lined up.

Installing RAM is easy to do and probably the easiest task in building a computer.

There will be one or two indentations on your RAM (depending on type of RAM). These indentations need to face the notches on the RAM slots. Now take the RAM carefully and push them into RAM slot, the little RAM clicks should snap into place.

If the BIOS screen comes up on your monitor and there is not a series of beepings then your RAM is successfully installed. To check if all your RAM is recognized by your computer, then you need to go to the BIOS setup, which will display the amount of RAM that is recognized.

This video can be useful for a new user who wants to change their DDR2 RAM in their Pentium computers. Same steps are applicable for installing other type of RAM (DDR1 or DDR3) in their respective Motherboards. (Voice : Hindi)

Wednesday, January 22, 2014

Assembling of Computer Motherboard (Gigabyte H61M-D2H) (Hindi) (720p HD)



Specifications of Gigabyte GA-H61M-D2H Motherboard :

  • Chipset : Intel H61 
  • Form Factor : Micro-ATX 
  • Socket Type : LGA 1155 
  • Compatible Processors : Intel Core i3 Processor, Intel Core i5 Processor, Intel Core i7 Processor, Intel Pentium Processor, Intel Celeron Processor 
  • Dimensions : 244 x 225 mm 
Memory
  • Memory Configuration : 16 GB DDR3 Dual Channel DIMM 
  • Memory Frequency : 800 MHz, 1066 MHz, 1333 MHz 
  • Number of Memory Slots : 4 Slots 
Other Features
  • Storage : 3 Gb/s SATA 
  • Ethernet Controller : Atheros 8151 
  • Ethernet Features : 10/100/1000 Megabit 
  • Audio Codec : Realtek ALC889 
  • Audio Channels : 7.1 
Expansion Slots
  • PCI Slots :
  • PCIe x1 Slots : 1 (2.0 Generation) 
  • PCIe x16 Slots : 1 (2.0 Generation) 
Internal I/O Headers
  • ATX Power Connectors : 1 (24 Pin ATX Power Connectors) 
  • Fan Headers : 1 (Processor Fan Headers) + 1 (System Fan Headers) 
  • SATA 3 Gb/s Headers :
  • Front Panel Headers :
  • USB 2.0 Headers :
Other Connectors on Internal Headers

  • 1 x 4-Pin ATX 12V Power Connector 
  • 1 x Parallel Port Header 
  • 1 x Serial Port Header 
  • 1 x Clearing CMOS Jumper 
Back Panel Ports

  • PS/2 : 2 
  • HDMI Ports : 1 
  • VGA/D Sub Ports : 1 
  • DVI Ports : 1 
  • USB 2.0 Ports : 4 
  • RJ-45 Ethernet Jacks : 1 
  • Audio I/O Channels : 3 
Features of Gigabyte GA-H61M-D2H Motherboard
  • Hardware Monitoring : System Voltage Detection, CPU/System Temperature Detection, CPU/System Fan Speed Detection, CPU/System Fan Speed Control 
  • BIOS : 2 x 32 Mbit Flash, Support for Dual BIOS, PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b 
  • Features : 32 Mb x 2 Flash ROM, DirectX 10.1 Support, DVI-D Port Supporting a Resolution of 1920 x 1200, HDMI Port, I/O Controller: iTE IT8728 Chip 
  • Advanced Technologies : 50,000 Hours Japanese Solid Capacitors, GIGABYTE Touch BIOS, Power Pak MOSFET, Ferrite Core Choke, 4-layer, DualBIOS 3 TB and HDD Support (Hybrid EFI Technology), On/Off Charge Technology, 108 dB Signal-to-noise Ratio Playback, Smart 6 Smarter PC System Management: Smart Quick Boot, Smart Recovery 2, Smart Recorder, Smart Time Lock, Auto Green, ErP Lot 6 Support, 
  • Advanced Features : Heatsink for North Bridge Chipset, Support for Q-Flash, Support for Xpress BIOS Rescue, Support for Xpress Recovery 2, Support for Easy Tune, Support for Smart 6, Support for Cloud OC, Support for Q-Share 
  • Manufacturer Warranty : 3 Years 
The price of Gigabyte GA-H61M-D2H Motherboard is around Rupees 3800/- (change according to cities wise).

Tuesday, November 5, 2013

How to install DDR1 RAM in Pentium 4 Motherboard (Funny) (Hindi) (720p HD)



RAM is sensitive to static charges and should be handled carefully. Never touch the metal conductors and only handle RAM by their edges. 

Depending on its architecture, there will always be at least one notch in a RAM, but never more than two.

RAM modules are keyed with little notches that fit over corresponding tabs in the RAM slots. Before inserting the RAM module, make sure that the notches and tabs are correctly lined up.

Installing RAM is easy to do and probably the easiest task in building a computer.

There will be one or two indentations on your RAM (depending on type of RAM). These indentations need to face the notches on the RAM slots. Now take the RAM carefully and push them into RAM slot, the little RAM clicks should snap into place.

If the BIOS screen comes up on your monitor and there is not a series of beepings then your RAM is successfully installed. To check if all your RAM is recognized by your computer, then you need to go to the BIOS setup, which will display the amount of RAM that is recognized.

This video can be useful for a new user who wants to change their DDR1 RAM in their Pentium computers. Same steps are applicable for installing new type of RAM (DDR2 or DDR3) in their respective Motherboards. (Voice : Hindi) 

The dialogue of this video is little humorous and has touch of a cricket match commentary.

Thursday, August 1, 2013

How to Install Internal Hard Drives : IDE Hard Drive Connectors



Learn how to connect IDE hard drives, and other tips for installing hard drives on computers.

How to install IDE Harddisk in Pentium Computer (Hindi) (720p HD)



Watch out easy steps to connect IDE hard drive and IDE DVD Rom with Pentium based motherboards. You have to connect carefully IDE Data cable (from Pentium Motherboard) and power cable {from Power Supplier (SMPS) of Computer} to IDE based Hard drive and DVD Rom. An IDE Cable has 36 holes in their ribbon cable end. We have to install this ribbon cable end properly in our IDE HDD and DVD Rom with care so that it does not break any pin located in our IDE devices. Some time, breakage of any important pin can cause malfunction in detection of our IDE devices by the computer system. Similarly, power cables have four colour wires attached to their cable end. They have four holes and can be attached to power pines provided in IDE devices. You can watch how to connect IDE data cable and power cable to IDE Devices in this video. This video can be useful for a new user who wants to change their IDE based Drives in their Pentium computers. (Voice : Hindi) 

Wednesday, July 17, 2013

Meet Gmail's New Inbox



New customizable tabs put you back in control so that you can see what's new at a glance and decide which emails you want to read and when.

Saturday, June 30, 2012

Sound Recording Setting for Bandicam in Windows 7

1. How to record sound in Windows Vista/7

If there is no sound for the captured streaming video in Windows Vista/7, it's usually the "Speakers" setting problem.
  1. Select ‘Win7/Vista Sound (WASAPI)’ in Primary Sound Device (Recommended) and select the ‘Microphone’ in Secondary Sound Device (Optional).
  2. Click ‘Settings’ button under the Sound tab of Bandicam, and click ‘Playback’ tab of Windows and select the 'Speakers', and then click the "Set as Default Device" menu.
  3. If you set the 'Speakers' properly, you may see the sound bar when recording.
  4. If you still can't record sounds with ‘Win7/Vista Sound (WASAPI)’, Try ‘Stereo Mix’.

Go to ‘Reording’ tab of Windows, and click ‘Show Disabled Devices (No. 1)’, and then click ‘Enable (No. 2)’.
Start Bandicam, and click ‘Settings’ button under the Video tab, and then choose ‘Stereo Mix (No. 3)’ in Primary Sound Device.


Tips
  • If you still can't record the sound, change the “Sound Device” of Bandicam.
  • Do not choose 'USB Sound Card' in sound device because you can't record USB sound.

2. How to record your voice in Windows 7/Vista (Microphone Recording)




1. Record your voice with "Two Sound Mixing" option (Windows 7/Vista)   
2. Start Bandicam, and click ‘Settings’ button under the Video tab.
  • Primary Sound Device: Select ‘Win7 Sound (WASAPI)’ or ‘Vista Sound (WASAPI)’.
  • Secondary Sound Device: Select ‘Microphone’.
  • Check at ‘Two Sound Mixing’ option.
  • Click ‘Settings’ button to open ‘Recording Device’ of Windows.

3. Select the 'Properties' option under the 'Microphone'
4. Set the Microphone Volume Control to between 70% and 90%.
5. Uncheck the "Listen to This Device" under the Listen tab.
 
3. Record your voice without "Two Sound Mixing" option (Windows 7/Vista)
    
1. Start Bandicam, and click "Settings" button under the Video tab
  • Primary Sound Device: Select "Win7 Sound (WASAPI)" or "Vista Sound (WASAPI)"
  • Secondary Sound Device: Select "Disable"
  • Click "Settings" button to open "Recording Device" of Windows

2. Select the 'Properties' option under the 'Microphone'
3. Set the Microphone volume control to between 70% and 90%.
4. Check the "Listen to this device" under the Listen tab.

If you still can't record the microphone sound, you need to re-install the sound card driver provided by the manufacture.

4. Multiple sound recording in Windows 7/Vista (Two Sound Mixing)



To record ‘Computer Sound’ and ‘Your Voice’ at the same time, use the ‘Two Sound Mixing’ option of Bandicam.
  1. Click ‘Settings’ button under the Video tab
  2. Select ‘Win7/Vista Sound (WASAPI)
  3. Select "Microphone" menu. (Tip : If there is no ‘Microphone’ menu, you can check 'Realtek HD Audio Input' and the like.)
  4. If you checked ‘Two Sound Mixing’option, you can get one mixed audio sound (Recommended). {Tip: If you unchecked ‘Two Sound Mixing’ option, you can get two separated audio sound (Not Recommended)}
  5. If you checked 'Only record Secondary Device’ while pushing [Space] option, you can only record ‘Microphone Sound’ while pushing Space Bar key on the keyboard.

5. How to remove "microphone howling/robot/echo sound"

1. Use a headset instead of speakers

If you use speakers, the sound goes from speakers to microphone and creates the howling sound. To reduce the howling/robot/echo sound, you'd better use a ‘Headset’ instead of speakers. If you don't have the headset, reduce the speaker volume and keep the speakers away from the microphone.

2. Disable ‘Secondary Sound Device’ of Bandicam.

If you use ‘Two Sound Mixing’ option, disable the ‘Secondary Sound Device’ of Bandicam. (Without the ‘Secondary Sound Device’, Bandicam still can record your microphone by ‘Stereo Mix’ or ‘Volume Mixer (WASAPI)’ of Windows)

3. Mute the Microphone Volume

For Windows Xp If you use ‘Two Sound Mixing’ option in Windows XP, go to Volume control window, choose ‘Playback’, and then mute the ‘Microphone Volume’. (Even though you mute the Microphone Volume in ‘Playback’, Bandicam still can record your voice through the microphone in ‘Recording’.)

For Windows 7 If you use ‘Two Sound Mixing’ option in Windows 7/Vista, go to the ‘Playback’ tab, double-click ‘Speakers’ click the Levels tab, and then mute the microphone volume. (Even though you mute the microphone volume of Speakers under the ‘Playback’ tab, Bandicam still can record your voice through the microphone under the ‘Recording’ tab.)

4. Uncheck the ‘Listen to this device’ in Windows 7/Vista

If you use ‘Two Sound Mixing’ option in Windows 7/Vista, go to the Recording tab, double-click ‘Microphone’ click the Levels tab, and then uncheck the ‘Listen to this device

5. How to remove microphone fireworks/noise

1. Disable ‘Secondary Sound Device’ of Bandicam

If you use ‘Two Sound Mixing’ option of Bandicam, disable the ‘Secondary Sound Device’ of Bandicam
Without the ‘Secondary Sound Device’, Bandicam can record your microphone by ‘Stereo Mix’ or ‘Volume Mixer (WASAPI)’ of Windows

2. Reduce the microphone volume by 50%

For Windows Xp : If you use ‘Two Sound Mixing’ option in Windows XP, go to Volume control window, choose ‘Recording’, and then reduce the microphone volume by 50%.

For Windows 7 : If you use ‘Two Sound Mixing’ option in Windows 7/Vista, go to the ‘Recording’ tab, double-click ‘Microphone’, click the Levels tab, and then reduce the microphone volume by 50%.
Related Posts Plugin for WordPress, Blogger...